铁路混凝土梁支架法现浇施工技术规程(TB 10110-2011 英文版)

铁路混凝土梁支架法现浇施工技术规程(TB 10110-2011 英文版)
作 者: 中国铁路总公司 编
出版社: 中国铁道出版社
丛编项:
版权说明: 本书为出版图书,暂不支持在线阅读,请支持正版图书
标 签: 暂缺
ISBN 出版时间 包装 开本 页数 字数
未知 暂无 暂无 未知 0 暂无

作者简介

暂缺《铁路混凝土梁支架法现浇施工技术规程(TB 10110-2011 英文版)》作者简介

内容简介

This Specification is provided for the purpose of guiding the construction of falsework for cast-in-place construction of railway concrete girders,harmonizing main technical requirements,enhancing construction management,and ensuring construction quality.This Specification is applicable to the falsework for cast-in-place construction of simply-supported or continuous girders.

图书目录

1 General Provisions

2 Terms and Symbols

2.1 Terms

2.2 Symbols

3 Construction Preparation

3.1 Site Investigation

3.2 Technical Preparation

3.3 Staff Training and Technical Disclosure

4 Falsework StructuraIDesign

4.1 General Requirements

4.2 Types of Falsework and Selection

4.3 Loads and Load Combinations

4.4 Falsework Structure Design Calculations

4.5 Falsework Structural Requirements

5 FalseworkConstruction

5.1 GeneralRequirements

5.2 Ground Preparation and Foundation Construction

5.3 Construction of Full Shoring Falsework

5.4 Beam and Post Falsework

6 Falsework Inspection and Acceptance

6.1 General Requirements

6.2 Inspection and Acceptance of Falsework Materials,Structural Components and Accessories

6.3 Inspection and Acceptance of Ground Preparation and Foundation

6.4 Inspection and Acceptance of Falsework

7 Falsework Preloading

7.1 General Requirements

7.2 Loading and Unloading

7.3 Preloading Monitoring

8 Girder Construction

8.1 General Requirements

8.2 Bearing Installation

8.3 Formwork Installation

8.4 Installation of Reinforcing Steel and Tendon Duct

8.5 Concrete Pouring

8.6 Tendon Tensioning and Duct Grouting

8.7 Falsework Lowering and Removal

9 Girder Lowering and Lateral Moving

9.1 General Requirements

9.2 Girder Lowering

9.3 Girder Lateral Moving

10 Energy Conservation and Environmental Protection

10.1 GeneralRequirements

10.2 Energy Conservation Measures

10.3 Erosion and Pollution Prevention

10.4 Air and Noise Pollution Prevention

10.5 Heritage and Scenic Attraction Area Protection

Appendix A Specified Strength and Elastic Modulus of Steel and Concrete Materials for Falsework Structures

Appendix B Specified Strength and Elastic Modulus of Wood Materials for Falsework Structures

Appendix C Design Value of Stability Load Resistance of Portal Frame Falsework

Appendix D Design Value of Load Capacity and Geometry of Bailey Beams

Appendix E Wind Pressure Height Coefficient

Appendix F Stability Coefficient φ for Axial Compression Member

Explanation of Wording in this Specification